It’s an outstanding mic for vocal and instrumental recording-exhibiting a warm, full sound with plenty of depth and detail. In 2009, Audio-Technica released the AT4047MP, a tripolar version of the AT4047/SV. Despite the similarities between the cardioid AT4047/SV and tripolar AT4047MP, the MP model’s specifications deviate from the SV in two important ways: The mic’s center-terminated capsule is covered and surrounded by a “precision-machined, nickel-plated brass, acoustic element baffle.” Audio-Technica literature states that this perforated metal plate provides stability and “enhanced sensitivity.” It also acts as a passive equalizer. The AT4047 MP is a multi‑pattern version of the AT4047 SV fixed‑cardioid mic, which has acquired a strong reputation, predominantly as a vocal … The MP has higher self-noise (14dBA vs. 9dBA). The membrane of the condenser capsule is 2 microns thick, and has an active diameter of 21.4mm. It is warm, detailed and can handle high SPL's unlike some other well known popular mics I've used. The longevity of these elastic bands appears to be at risk if the microphones are detached from the mounts repeatedly. My only gripe is that I would have preferred more than just a single polar pattern. Cardioid Please let us know! The AT4047MP is a multipattern version of Audio-Technica’s AT4047/SV. It bears a familial resemblance to the AT4033, also a cardioid condenser; the 4033 has an electret capsule and transformerless output. Hey there! Did we get anything wrong on this page? The microphone’s included shockmount suspends the base of the mic between two elastic bands, which invariably roll and twist as the mic is inserted. This mic has a vintage character to it that I really like and a very wide dynamic range. The microphone also has a switchable -10dB pad, and a high-pass filter (-12dB/octave @ 80Hz); the pad and filter switches are on the rear of the microphone body. And so I've decided to do a little comparison with my other two microphones. The MP has lower sensitivity (7.9 mV/Pa vs. 17.7 mV/Pa). The MP has higher self-noise (14dBA vs. 9dBA). I just got myself a new mic, the MXL V67N. On vocals there’s a breathy sort of intimacy that sits in the track perfectly for certain tunes. The AT4047 is a FET condenser with a fixed cardioid pickup pattern. Did we get anything wrong on this page? Both are FET condenser microphones with transformer-coupled output circuits, intended to “provide sonic characteristics reminiscent of early FET [microphones].”. In 2009, Audio-Technica released the AT4047MP, a tripolar version of the AT4047/SV. The AT4047/SV comes with one of the best shock-mounts I’ve seen and has a first-rate fit and finish. Further, the microphone handles surprisingly high SPLs with ease and is awesome for ambience recording when used as a pair. Omnidirectional The Audio-Technica AT4047MP is the multi-pattern version of the company's AT4047/SV, a transformer-coupled condenser with a sound that harkens back to classic FET mics. A switch on the front of the microphone allows selection of three polar patterns: Cardioid, Omnidirectional, and Figure-of-8. The perforated metal plate covering the diaphragm is said to “[provide] enhanced element stability and optimal sensitivity;” it also acts as a passive acoustic equalizer. Considering the AT4047/SV has a suggested retail price of $695, acquiring a pair is not so farfetched. The Audio-Technica AT4047/SV is also known as: AT4047-SV, AT4047SV, 4047SV, AT4047, AT-4047. Despite the similarities between the cardioid AT4047/SV and tripolar AT4047MP, the MP model’s specifications deviate from the SV in two important ways: The MP has lower sensitivity (7.9 mV/Pa vs. 17.7 mV/Pa). The MP version has slightly higher self-noise and lower sensitivity, but offers Omni and Figure-of-8 patterns in a similar transformer-coupled topology. What makes Audio-Technica’s new AT4047/SV so attractive is its ability to function well in many applications. (17.7 mV/Pa; 20 - 18,000 Hz). The capsule is a center-terminated design with a 2-micron membrane whose active diameter is 21.4mm. I’d be thrilled to have three or four. Learn more. Overview. On-mic switches provide access to a -10dB pad and a high-pass filter (-12dB/octave @ 80Hz). It's one I feel is often overlooked and under rated for its price range. Regular readers may remember that we took a look at Audio‑Technica's AT4050 ST stereo condenser mic in the last issue of SOS, and this month I'm completing my look at the company's new AT4000‑series mics by putting the AT4047 MP through its paces. The Audio-Technica AT4047/SV is an extremely versatile cardioid condenser microphone. Please let us know! At4047 MP vs tlm103 When you buy products through links across our site, we may earn an affiliate commission. The MP version has slightly higher self-noise and lower sensitivity, but offers Omni and Figure-of-8 patterns in a similar transformer-coupled topology. Mainly because it looks so pretty. A-T claims the mic’s transformer-coupled, true-condenser design creates a “rich, warm sound [that] takes you back to the classic FET studio microphones.” External reports suggest that, as the name implies, the AT4047/SV was intended to evoke the sound of the U-47 FET. (7.9 mV/Pa; 20 - 18,000 Hz).
Advantages And Disadvantages Of Kitchen Garden, Loose Leaf Green Tea Bulk, Skyrim Bards College Mod, Uwell Nunchaku 80w Tc Starter Kit, Clay Mask For Combination Skin, How To Age Up Baby Sims 3, Multiple T Test Spss, Hatha Yoga Benefits Weight Loss, Dua For Beautiful Baby While Pregnant, Trx Burn Suspension System Trainer, Experiential Learning Questionnaire,